Emerson CF930ORB01 Manuel D’Utilisation

Trouble Shooting

TROUBLE

PROBABLE CAUSE

SUGGESTED REMEDY

1. Fan will not

1. Fuse or circuit breaker

1. Check main and branch

start.

blown.

circuit fuses or circuit breakers.

WARNING:

Make sure

main power is turned off.

2. Loose power line

2. Check line power connections

connections to the fan.

to fan.

3. Fan/Light Wall Control is OFF.

3. Turn ON Fan/Light Wall Control.

4. Code switches in remote

4. Check that both code switches

control receiver and Fan/Light

are set in the same positions.

Wall Control are not set in the
same position.

2. Fan sounds

1. Blades not attached to fan.

1. Attach blades to fan before

noisy.

operating.

2. Screws securing fan blades

2. Check to make sure the screws

to motor are loose.

which attach the blades to the
motor are tight.

WARNING:

Make sure main

power is turned off.

3. Loose screws in motor housing. 3. Check to make sure all screws

in motor housing are snug
(not over-tight)

3. Fan wobbles

1. Setscrews in motor coupling are 1. Raise coupling cover and tighten

excessively.

not tightened securely.

setscrews securely.

2. Setscrew in the hanger ball/

2. Tighten the setscrew in the

downrod assembly is loose.

hanger ball/downrod assembly.

3. Screws securing fan blades

3. Check to be sure screws which

to motor are loose.

attach the fan blade to the
motor are tight.

4. Fan blades are not seated

4. Check to be sure that the

properly.

screws securing the fan
blades seat firmly.

5. Hanger bracket and/or ceiling

5. Tighten the hanger bracket

outlet box is not securely

screws to the outlet box, and/or

fastened.

secure outlet box.

6. Fan blades out of balance.

6. Interchanging an adjacent (side

by-side) blade pair can
redistribute the weight and result
in smoother operation.
Or use supplied balancing kit to
balance blades.

WARNING:

FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX

OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.