Emerson CF4501AP00 Manuel D’Utilisation
3
Unpacking Instructions
1.
Check to see that you have received the following
parts:
parts:
NOTE: If you are uncertain of part description,
refer to exploded view illustration.
refer to exploded view illustration.
a. Fan motor and housing assembly
b. One motor cover
c. One ceiling cover
d. Five blade flanges
e. One hanger ball/downrod assembly
f. One hanger bracket
g. One uplight lead assembly
h. Three 25-watt candelabra bulbs
i. One loose parts bag containing:
b. One motor cover
c. One ceiling cover
d. Five blade flanges
e. One hanger ball/downrod assembly
f. One hanger bracket
g. One uplight lead assembly
h. Three 25-watt candelabra bulbs
i. One loose parts bag containing:
1. One setscrew
2. One 5/32" hex wrench
3. Eleven 10-32 x 5/8" oval head screws
4. Two 1” threaded studs
5. Two 1-1/4” threaded studs
6. Four knurled knobs
7. Three wire connectors
8. Two screws, 8-32 x 3/8"
9. Two pull chain pendant and coupling
2. One 5/32" hex wrench
3. Eleven 10-32 x 5/8" oval head screws
4. Two 1” threaded studs
5. Two 1-1/4” threaded studs
6. Four knurled knobs
7. Three wire connectors
8. Two screws, 8-32 x 3/8"
9. Two pull chain pendant and coupling
10. One hairpin clip
11. One clevis pin
12. Two lockwashers
11. One clevis pin
12. Two lockwashers
This Manual Is Designed to Make it as Easy as Possible for You to Assemble,
Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver
One stepladder
One wire stripper
MATERIALS
Wiring outlet box and box connectors must be of
type required by the local code. The minimum wire
would be a 3-conductor (2-wire with ground) of the
following size:
type required by the local code. The minimum wire
would be a 3-conductor (2-wire with ground) of the
following size:
Installed Wire Length
Wire Size A.W.G.
Up to 50 ft.
14
50-100 ft.
12
Before assembly your ceiling fan, refer to section
on proper method of wiring your fan (page 8).
If you feel you do not have enough wiring
knowledge or experience, have your fan installed
by a licensed electrician.
on proper method of wiring your fan (page 8).
If you feel you do not have enough wiring
knowledge or experience, have your fan installed
by a licensed electrician.
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
missing. Call Toll-Free:
1-800-654-3545
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
CEILING
COVER
COVER
FOAM
PACKING
PACKING
PROTECTIVE
PLASTIC BAG
PLASTIC BAG
FOAM
PACKING
PACKING
CARTON
MOTOR AND
HOUSING ASSEMBLY
HOUSING ASSEMBLY
HANGER BALL/
DOWNROD
ASSEMBLY
DOWNROD
ASSEMBLY
HANGER
BRACKET
BRACKET
LOOSE
PARTS BAG
PARTS BAG
BLADE
FLANGES
FLANGES
MOTOR
COVER
COVER
UPLIGHT LEAD
ASSEMBLY
ASSEMBLY
3 25-WATT
CANDELABRA
BULBS
CANDELABRA
BULBS
WARNING
!
WARNING
!
WARNING
!
13. Twenty-one #10-24 x 12mm pan head
screws
14. Twenty-one flat washers
NOTE: Place the parts from the loose parts bags
in a small container to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
in a small container to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
2.
Remove and discard the two cardboard shipping
retainers securing the motor hub in the motor
housing assembly.
retainers securing the motor hub in the motor
housing assembly.
3.
Remove the fan motor assembly from the
protective plastic bag. Place all carton contents on
a protective surface.
protective plastic bag. Place all carton contents on
a protective surface.
U.L. Model No.: CF4801 and CF4501