Emerson CF725GBZ00 Manuel D’Utilisation
3
This Manual is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan
Do not install or use fan if any part is
damaged or missing. Call Toll-Free:
damaged or missing. Call Toll-Free:
1-800-654-3545
!
WARNING
This product is designed to use only
those parts supplied with this product
and/or any accessories designated
specifically for use with this product by
Emerson Electric Co. Substitution of
parts or accessories not designated for
use with this product by Emerson Electric
Co. could result in personal injury or
property damage.
those parts supplied with this product
and/or any accessories designated
specifically for use with this product by
Emerson Electric Co. Substitution of
parts or accessories not designated for
use with this product by Emerson Electric
Co. could result in personal injury or
property damage.
!
WARNING
Tools Needed for Assembly
One Phillips head screwdriver
One wire stripper
One stepladder
Five wire connectors (supplied)
One wire stripper
One stepladder
Five wire connectors (supplied)
Materials
Wiring, outlet box and box connectors
must be of type required by the local code.
The minimum wire would be a 3-conductor
(2-wire with ground) of the following sizes:
must be of type required by the local code.
The minimum wire would be a 3-conductor
(2-wire with ground) of the following sizes:
Installed Wire Length
Wire Size A.W.G.
Up to 50 ft.
14
50-100 ft.
12
Before assembling your ceiling fan, refer
to section on proper method of wiring
your fan (page 8). If you feel you do not
have enough wiring knowledge or
experience, have your fan installed by a
licensed electrician.
to section on proper method of wiring
your fan (page 8). If you feel you do not
have enough wiring knowledge or
experience, have your fan installed by a
licensed electrician.
!
WARNING
Unpacking Instructions
For your convenience, check-off boxes are provided next to each step. As each
step is completed, place a check mark in the box. This will insure that all steps
have been completed and will be helpful in finding your place should you be
interrupted.
step is completed, place a check mark in the box. This will insure that all steps
have been completed and will be helpful in finding your place should you be
interrupted.
NOTE: If you are uncertain of part
description, refer to exploded view
illustration.
description, refer to exploded view
illustration.
a. Fan motor and upper housing
assembly
b. One ceiling canopy
c. Five blade flanges
d. Five fan blades
e. One hanger bracket
f. One hanger ball/downrod assembly
g. One glass bowl
h. One housing downlight assembly
i. One upper housing ring
j. One SW102 fan/light wall control
k. One coupler cover
l. Two 60-watt candelabra bulbs
c. Five blade flanges
d. Five fan blades
e. One hanger bracket
f. One hanger ball/downrod assembly
g. One glass bowl
h. One housing downlight assembly
i. One upper housing ring
j. One SW102 fan/light wall control
k. One coupler cover
l. Two 60-watt candelabra bulbs
1. Open styrofoam unit containing fan.
Remove top half of styrofoam unit.
Remove parts and check to see that
you have received the following parts:
Remove parts and check to see that
you have received the following parts:
U.L. Model No.: CF725
BP7369 Vienne 12/7/08 5:21 PM Page 3