Emerson CF703WW02 Manuel D’Utilisation

1. Reversing switch in neutral position.

1. Make sure reversing switch position is all the

way to one side.

2. Fuse or circuit breaker blown.

2. Check main and branch circuit fuses or circuit 

breakers.

3. Loose power line connections to the fan, or 

3. Check line wire connections to fan and switch 

loose switch wire connections in switch 

wire connections in the switch housing.housing.

1. Blades not attached to fan.

1. Attach blades to fan before operating.

2. Loose screws in motor housing.

2. Check to make sure all screws in motor 

housing are snug (not over-tight).

3. Screws securing fan blade flanges to motor

3. Check to make sure the screws which attach 

are loose.

the fan blade flanges to the motor hub are tight.

4. Switch housing binding against blade hub.

4. Check to make sure that the switch housing 

does not bind against the blade hub.

5. Wire connectors inside switch housing rattling.

5. Check to make sure wire connectors in switch  

housing are not rattling against each other or 

against the interior wall of the switch housing.

6. Screws holding flanges to blades are loose.

6. Tighten screws securely.

1. Setscrew in motor coupling is loose.

1. Tighten the setscrew and then tighten the 

jam nut.

2. Setscrew in hanger ball/downrod assembly is

2. Tighten the setscrew in the hanger ball/downrod

loose.

assembly.

3. Screws securing fan blade flanges to motor 

3. Check to be sure screws which attach the fan 

are loose.

blade flanges to the motor hub are tight.

4. Fan blade flanges not seated properly.

4. Check to be sure the fan blade flanges seat 

firmly and uniformly to the surface of the 
motor hub. If flanges are seated incorrectly, 
loosen the flange screws and retighten 
according to the procedure in the section on 
"How to Put Your Ceiling Fan Together".

5. Hanger bracket and/or ceiling outlet box is not 

5. Tighten the hanger bracket screws to the 

securely fastened.

outlet box, and/or secure outlet box.

6. Fan blades out of balance.

6. Interchanging an adjacent (side-by-side)blade  

pair can redistribute the weight and result in 
smoother operation.

7

Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth
to avoid scratching the finish.

Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.

1. Ceiling Fan Light Kits (see store or catalog).

2. Ceiling Fan/Light Controls (see store or catalog).

1. Ceiling Fan Light Kits (see store or catalog).

2. Ceiling Fan/Light Controls (see store or catalog).

3. Downrod Extension Kits (see store or catalog).