Emerson CF805SW 00 Manuel D’Utilisation
Trouble Shooting
TROUBLE
PROBABLE CAUSE
SUGGESTED REMEDY
1. Fan will not
1. Reversing switch in neutral position.
1. Make sure reversing switch position is
start.
all the way to one side.
2. Fuse or circuit breaker blown.
2. Check main and branch circuit fuses or
circuit breakers.
3. Loose power line connections to the fan,
3. Check line wire connections to fan and
or loose switch wire connections in switch
switch wire connections in the switch
.
housing.
housing.
2. Fan sounds
1. Blades not attached to fan.
1. Attach blades to fan before operating.
noisy.
2. Loose screws in motor housing.
2. Check to make sure all screws in motor
housing are snug (not over-tight).
3. Screws securing fan blade flanges
3. Check to make sure the screws which
to motor are loose.
attach the fan blade flanges to the
motor are tight.
motor are tight.
4. Wire connectors inside switch housing
4. Check to make sure wire connectors
rattling.
in switch housing are not rattling
against each other or against the
interior wall of the switch housing.
against each other or against the
interior wall of the switch housing.
5. Screws holding flanges to blades are
5. Tighten securely.
loose.
3. Fan wobbles
1. Screws securing fan blade flanges to
1. Check to be sure screws which attach
or shakes.
motor are loose.
the fan blade flanges to the motor are tight.
2. Fan blade flanges not seated properly.
2. Check to be sure the fan blade flanges
seat firmly and uniformly to the surface
of the motor. If flanges are seated
incorrectly, loosen the flange screws
and retighten according to the procedure
in the section on "How to Put Your
Ceiling Fan Together".
of the motor. If flanges are seated
incorrectly, loosen the flange screws
and retighten according to the procedure
in the section on "How to Put Your
Ceiling Fan Together".
3. Mounting plate and/or ceiling outlet
3. Tighten the mounting plate screws to
box is not securely fastened.
the outlet box, and/or secure outlet box.
4. Fan blades out of balance.
4. Interchanging an adjacent (side-by-
side) blade pair can redistribute the
weight and result in smoother operation.
weight and result in smoother operation.
Maintenance
IMPORTANT CARE INSTRUCTIONS
For Your Ceiling Fan
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth
to avoid scratching the finish.
to avoid scratching the finish.
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.
be avoided to prevent damage to finish.
7
Accessories
1. Ceiling Fan Light Kits (see store or catalog).
2. Emerson SW-95 Speed Control (see store or
catalog).
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of an electrical shock.
could damage the motor or the blades and create the
possibility of an electrical shock.
WARNING
!
To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control
device.
use this fan with any solid-state speed control
device.
WARNING
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Company. Substitution of parts or
accessories not designated for use with this product
by Emerson Company could result in personal injury
or property damage.
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Company. Substitution of parts or
accessories not designated for use with this product
by Emerson Company could result in personal injury
or property damage.
The use of any other control not specifically
approved for this fan could result in fire, shock and
personal injury.
approved for this fan could result in fire, shock and
personal injury.
WARNING
!
WARNING
!
WARNING:
FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER
BEFORE TROUBLE SHOOTING YOUR FAN.
!