Emerson CF804SAB 00 Manuel D’Utilisation
This Manual Is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver
One 1/4" blade screwdriver
One stepladder
One wire stripper
Three wire connectors (supplied)
One 1/4" blade screwdriver
One stepladder
One wire stripper
Three wire connectors (supplied)
Materials
Wiring electrical box and box connectors must be of
type required by local code. The minimum wire would
be a 3-conductor (2-wire with ground) of size shown at
right.
type required by local code. The minimum wire would
be a 3-conductor (2-wire with ground) of size shown at
right.
Installed Wire Length
Wire Size A.W.G.
Up to 50 ft.
14
50 - 100 ft.
12
1.Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description,
refer to exploded view illustration.
refer to exploded view illustration.
a. Fan housing
b. Mounting plate
b. Mounting plate
c. Fan motor assembly
d. Five fan blades
e. Five blade flanges
e. Five blade flanges
f. One loose parts bag containing:
1. Sixteen 3/16-24 x 9/32" phillips washer
head screws.
2. One wood ball with chain.
3. Three wire connectors.
4. Four 3/16-24 x 5/8" housing screws.
5. Four 1/4" hex locknuts.
6. Eleven 1/4-20 x 1/2" phillips head screws.
3. Three wire connectors.
4. Four 3/16-24 x 5/8" housing screws.
5. Four 1/4" hex locknuts.
6. Eleven 1/4-20 x 1/2" phillips head screws.
NOTE: Place the parts from the loose parts bag in
a small container to keep them from being lost. If
any parts are missing, contact your local retailer
or catalog outlet for replacement before
proceeding.
a small container to keep them from being lost. If
any parts are missing, contact your local retailer
or catalog outlet for replacement before
proceeding.
2. Remove the fan assembly from the protective
plastic bag. Place the fan assembly into the upper
foam pad with the lead wires up.
foam pad with the lead wires up.
Unpacking Instructions
For your convenience, check-off boxes are provide next to each step. As each step is completed, place a
check mark in the box. This will insure that all steps have been completed and will be helpful in finding
your place should you be interrupted.
check mark in the box. This will insure that all steps have been completed and will be helpful in finding
your place should you be interrupted.
FAN
BLADES
BLADES
UPPER
FOAM PAD
FOAM PAD
MOUNTING
PLATE
PLATE
FAN
HOUSING
HOUSING
BLADE FLANGES
FAN
MOTOR
ASSEMBLY
MOTOR
ASSEMBLY
LOWER
FOAM PAD
FOAM PAD
CARTON
3
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 5). If you feel
you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
proper method of wiring your fan (page 5). If you feel
you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
WARNING
!
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
missing. Call Toll-Free:
1-800-654-3545
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Company. Substitution of parts or
accessories not designated for use with this product
by Emerson Company could result in personal injury
or property damage.
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Company. Substitution of parts or
accessories not designated for use with this product
by Emerson Company could result in personal injury
or property damage.
WARNING
!
WARNING
!