Honeywell RPWL800A Manuel D’Utilisation
Installation and Use
69-2108EFS—01
10
Motion sensor
The PIR (‘Passive InfraRed’) sensor activates the door camera automatically. The
receiver produces a ‘ping’ sound and displays the door camera image for approxi-
mately 30 seconds.
If the motion sensor is not required, then it can be disabled.
To switch the motion sensor off, press and hold the call button on the camera for
more than ten seconds. The confidence indicator blinks rapidly to confirm that the
motion sensor is disabled.
To switch the motion sensor back on, press and hold the call button for more than ten
seconds, the confidence indicator remains on for two seconds to confirm.
Note: Power loss to the camera or a change of batteries will reset the sensor back on.
The PIR (‘Passive InfraRed’) sensor activates the door camera automatically. The
receiver produces a ‘ping’ sound and displays the door camera image for approxi-
mately 30 seconds.
If the motion sensor is not required, then it can be disabled.
To switch the motion sensor off, press and hold the call button on the camera for
more than ten seconds. The confidence indicator blinks rapidly to confirm that the
motion sensor is disabled.
To switch the motion sensor back on, press and hold the call button for more than ten
seconds, the confidence indicator remains on for two seconds to confirm.
Note: Power loss to the camera or a change of batteries will reset the sensor back on.
Door camera
69-2108EFS_A.indd 10
11/30/2007 1:51:49 PM