NuTone 99526440A Manuel D’Utilisation

•  Wireless Door Chime - requires 3

“D” alkaline batteries (not inlcuded)

•  Wireless Door Chime Pushbutton

& 2-volt alkaline battery

•  Mounting Hardware

•  Battery powered chime and trans-

mitter - no wires to run

•  Adjustable volume control

•  25-foot open air operating range

•  64 frequency channels to minimize

interference from other devices

•  Optional NuTone wireless push-

buttons available for multiple doors

(side, rear, etc.)

PUSH

BUTTON

BATTERY

{

DOOR SET

JUMPERS

installation instructions

read & save these instructions

FRONT

CASE

NOTCH

BACK

PLATE

2. install pushbutton battery.

Open the pushbutton case and install

the 2V alkaline battery (included).

To open pushbutton case: Insert a

flat-blade screwdriver into the notch

on the bottom and push to open. Lift

the front case up and away from the

back plate.

Use the door set jumpers on the

pushbutton(s) to change the chime

melody.

Tip: Multiple pushbuttons can be set

to ring a different melody for each

door (up to three melodies).

Put jumpers on pins y and x for

Westminster chime.

Put jumpers on pins y and * for 2-

note “ding-dong”.

Put jumpers on pins x and * for -

note “ding”.

Remove the back of the chime case

and install three .5V alkaline, size

“D” batteries (not included). Replace

back case.