NuTone LA522WH Manuel D’Utilisation

2

TOP

BACK

PLATE

LONG TAB

Use the hardware (pro-

vided) to attach the back 

plate of the pushbutton

to its mounting surface.

Make sure the long tab is

at the bottom.
If mounting the pushbut-

ton to a metallic or con-

crete surface: Increase

the operating range by

using wood spacers be-

tween the back plate and

the mounting surface.
Snap the pushbutton

case onto the back plate.

Depress pushbutton and listen for

chime. If necessary, adjust volume 

using the control on the back of

chime. If chime does not function

properly, refer to “Troubleshooting”

section.

chime

Open chime case. (see step )

Replace batteries with three .5V

alkaline, size “D” (R20) batteries.

Close chime case.

Pushbutton

Open pushbutton case (see step

2). Replace battery with one 2V

alkaline, type A23 (Model RCA23),

or MN2 battery. Close pushbutton

case.

Additional wireless door chimes

can be set to ring separately from

or together with other wireless door

chimes. Set the pushbutton and

chime frequency codes accordingly.

See page 3.

1

6

Place the chime and pushbutton in

their desired locations and press the

pushbutton. If the chime sounds, pro-

ceed to step 5. If the chime does not

sound, refer to the “Troubleshooting”

section for help.
5. install the chime.

Use the hardware (provided) to

mount the chime on a wall. The

chime can be mounted by using the

holes in the back of the case or by

using 2 screws with the keyholes.

Snap the front of the chime case

back on.