Duracraft DH-890 Manuel D’Utilisation

1. Always place this humidifier on a firm, flat and level surface. This humidifier may not 

work properly on an uneven surface.

2. Place this humidifier in an area where it is not accessible to children.

3. Do not place the humidifier near any heat sources such as stoves, radiators, and 

heaters.

4. Before using the humidifier, check the power cord for any signs of damage. If the 

cord is found to be damaged, DO NOT USE and return the humidifier to the 
manufacturer under the warranty agreement for repair.

5. This appliance has a polarized plug (one blade is wider than the other). To reduce 

the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the 
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a 
qualified electrician. DO NOT attempt too defeat this safety feature.

6. To disconnect the humidifier, first turn controls to the OFF position, then grip the plug 

and pull it from the wall outlet. Never pull by the cord.

7. A loose fit between the AC outlet (receptacle) and plug may cause overheating and 

a distortion of the plug. Contact a qualified electrician to replace loose or worn  outlet.

8. The humidifier should always be unplugged and emptied when not in operation or 

while being serviced or cleaned.

9. Never tilt or attempt to move the humidifier while it is operating or filled with water. 

UNPLUG the humidifier before moving.

10. This humidifier requires regular cleaning. Refer to the CLEANING instructions 

provided. Never clean the humidifier in any manner other than as instructed in this 
manual.

11. Turn the humidifier OFF if the relative humidity exceeds 60%, or if you notice moisture on 

the inside of your windows. For proper humidity reading use a hygrometer, which is 
available in many hardware and department stores or by ordering one from the 
manufacturer (see Care Products).

HU4085.01 DH-890 E/F/S OM  8/3/01  1:05 PM  Page 2