Delta Faucet DF-745 Manuel D’Utilisation

Service                                                                    DF-745

       75

The DF-700 series moisture analyzer constantly performs internal monitoring of the analyzer 
operation. In the event of a failure a system alarm will be displayed on the front panel. In 
addition the failure will be logged in the System Error Log (see page 47). In the event of a 
system alarm contact Delta F with information as displayed in the log as well as on the Signal 
Monitor screen as shown on page 60.

If it is necessary to return the analyzer to the factory or ship it to another location, follow the 
packaging and shipping procedure below in order to prevent damage to the analyzer during 
shipment.

1. Isolate the analyzer gas path properly by following the steps on page 37.

2. Turn off the power switch.  Disconnect any source of AC power from the analyzer.

3. Disconnect all external electrical connections (alarms, data output, communications 

etc.).

4. Mark each for reattachment later.

5. Ensure that all internal components are adequately secured and put the analyzer in its 

original container.  

If the analyzer is being returned to the factory, call Delta F at (781) 935-5808 to obtain a 
Return Material Authorization number. Clearly mark the Return Material Authorization 
number on the outside of the shipping container and on the packing list.  

The analyzer should be returned (freight prepaid) to: 

Delta F Corporation

4 Constitution Way

Woburn, MA 01801-1087