APC ACRD100 Manuel D’Utilisation

Select the main- and sub-menu options specified in the path statement to view or configure a setting. The 
path statement lists the main- and sub-menu items you select to navigate to the item to view or modify. 
The parts of the path statement are defined below:

Your starting point is the main menu.

Scroll to and select this option from the main menu.

Scroll to and select this option from the sub-menu.

Subsequent options are listed and defined under the path statement.

The cooling unit has two levels of password protection: 

•  Device password allows Device Users to change basic and environmental settings.
•  Admin password allows all privileges granted for Device Users, and also allows the 

Administrator to modify settings that control the components in the cooling unit or change 
advanced options.

When you try to change a setting, the display interface prompts you to enter your Admin password. The 
default value for both the Device and Admin password is apc (lowercase). To enter your password, use 
the up or down arrow key to scroll through the available character set. Press the 

E

NTER

 

key to select the 

current character and move the cursor to the next character position. After selecting the last character of 
your password, press the 

E

NTER

 key once more to submit your password.

Once the password is entered, it remains in effect until the period of inactivity exceeds the Password 
Timeout setting.

See “Timeout” on page 23.

Note: Passwords are case-sensitive.

To start the cooling unit, change the setting to On by pressing the 

ENTER

 key to toggle from Standby to 

On. The fans will start.

The cooling unit will run according to the configured settings.

Note: On/Standby only affects the local cooling unit. You must set the On/Standby option 
for each cooling unit in the cooling group.
Note: To toggle between On and Standby from the scrolling status screens, press the 

ENTER

 

key three times in rapid succession.