APC ACRD100 Manuel D’Utilisation

1. Use Ping with a size of 113 bytes to assign the IP address defined by the ARP command. For the 

IP address defined in step 1, use one of the following Ping commands: 

– Windows command format:

ping 156.205.14.141 -l 113

– LINUX command format:

ping 156.205.14.141 -s 113

2. Use Telnet to access the Network Management Card at its newly assigned IP address. For 

example:

telnet 156.205.14.141

3. Use apc for both user name and password.

See “Control console” on page 36 to finish the configuration.

After you log on at the control console, as described in“Local access to the control console” on page 35 
or “Remote access to the control console” on page 35:

1. Choose Network from the Control Console menu.
2. Choose 

from the Network menu.

3. If you are not using a 

BOOTP or DHCP 

server to configure the

 TCP/IP

 settings, select the Boot 

Mode menu and then select Manual boot mode.

4. Set the System 

, Subnet Mask, and Default Gateway address values. (Changes will take effect 

when you log out.)

5. Press 

E

NTER

 to return to the 

 menu. 

6. Press 

C

TRL

+C

 to exit to the Control Console menu.

7. Log out (option 4 in the Control Console menu).

Note: If you disconnected a cable from the local computer during the procedure 
described in “Local access to the control console” on page 35, reconnect that cable and 
restart the associated service.