Heath Zenith 6280 Series Manuel D’Utilisation

-3-

Chime with Separate Decorative Cover:
The chime base can be mounted in two different ways. The base can be mounted
using the keyholes or the three mounting holes. The base may be mounted hori-
zontally or vertically depending upon the specific model purchased.
Keyhole Mounting:
•  Use template on back cover of manual for screw placement. Note: Make 

sure holes are level before drilling.

•  Drill two 7/32" diameter pilot holes for wall anchors and insert anchors.
•  Mount keyhole screws to wall leaving about 1/8" (3 mm) of the screw threads

exposed (see Figure 5).

•  Using keyholes on back of chime base, hang base on screws.
•  Place chime cover over tab(s) on top of chime base.
Screw Mounting:
•  Remove batteries from chime.
•  Place chime against wall and verify the chime is level.
•  Use chime holes as a template (see Figure 6). Drill three 7/32" diameter pilot

holes for wall anchors (provided) and insert anchors.

•  Insert 3 screws (provided) through holes in back of chime.
•  Verify chime is level and tighten screws securely.
•  Replace batteries (see Figure 2).
•  Place chime cover over tab(s) on top of chime base.

Keyhole Slots

(Horizontal Mounting)

Keyhole Slots

(Vertical Mounting)

Cover Hanging 

Tabs

Keyhole 

Screw (x2)

Screw Mounting

Holes

Note: Chime shown
mounted vertically.

Note: Chime shown
mounted horizontally.