Gianni Industries DG-5 Fascicule

DG-5 The Digital Keyless Entry System

Operation User's Manual

1. Features:

4 digit codes （5 digit codes available by special order）

Tamper Switch Included

Door Reed Switch Input for Anti-Trailing

10 user PINs

Fully Programmable via keypad and master code

Non-Volatile

Memory

Invalid PIN Lock-out

2. Specifications:

Operating Voltage: 9~14 Vdc

Current Draw: Average 20mA, Peak 70mA @ 12Vdc

Input: One request-to-exit, and time out reed switch

Relays: N.O./N.C./Com. Output (free voltage contact),
3A@ 125Vac or 30Vdc

Case Material: ABS （UL94V0）

Operating

Temperature:-20~+70℃

Ambient Humidity:0~95% relative humidity non-
condensing

Visual

Signals:

Green: Power on

Red: Relay activated

Yellow: Program Mode、Lock-out

Factory Master Code: 1234

Invalid PIN Lockout: System will shut down 60 seconds while 6 times of incorrectly
password attempted.

Relay Activation Time: （＊20）

Pulse

mode：1~99 seconds（01~99）

Latching

mode（00）

EPROM: Non-volatile memory, System will retain all programs and codes after a total
loss of power.

User

PINs:

（＊

01~＊10）It is possible to program 10 different user PIN codes.

3. Program

Instruction:

Enter Program Mode:

1. Enter the master code twice (Factory master is 「1234」)

→2 beeps and the Yellow LED will light up.
→ you are now in the "programming mode".

Note:

After 60 seconds if you have not entered any codes or data, the system will

automatically exit from the programming mode. After 6 wrong attempts at the master
code the lockout facility will operate.

Exiting from the program mode:

1. Press「#」 to exit from the programming mode.