United States Stove 5700 Manuel D’Utilisation

Page de 28
 
-6- 
INSTALLATION 
INSTALLATION OPTIONS 
 
Read this entire manual before you install and use your 
Ashley Heritage  
stove.  Failure to follow 
instructions may result in property damage, bodily injury, or even death! 
(See specific installation details for clearances and other installation requirements) 
Freestanding Unit—supported by (4) legs and placed on a non-combustible floor surface in compliance with 
clearance requirements for a freestanding stove installation. 
An Alcove Unit—supported by (4) legs and placed on a non-combustible floor surface in compliance with clearance 
requirements for an alcove installation. 
Your 
Ashley Heritage Model 5700 
stove may be installed to code in either a conventional or mobile home 
(see SPECIAL MOBILE HOME REQUIREMENTS). 
It is recommended that only a authorized technician install your 
Ashley Heritage 
stove, preferably an NFI certified 
specialist. 
 
FLOOR PROTECTION 
This unit must be installed on a non-combustible floor surface.  If a floor pad is used, it should be UL listed or equal.  
The floor pad or non-combustible surface should be large enough to extend a minimum of 6-inches in front, 6-
inches on each side, and 1-inch behind the stove (see FIGURE 1).   
Floor protection must extend under and 2-inches to each side of the chimney tee for an interior vertical installation 
(see FIGURE 2). 
Your 
Ashley Heritage Model 5700 
stove will need a minimum 36 1/4” x 30 3/8” floor protector. 
 
 
 
 
 
 
 
 
 
 
 
IMPROPER INSTALLATION: The manufacturer will not be held responsible for damage caused by the 
malfunction of a stove due to improper venting or installation. Call (800) 750-2723 and/or consult a pro-
fessional installer if you have any questions.
 
FIGURE 1 
THROUGH THE WALL INSTALLATION 
FIGURE 2 
INTERIOR VERTICAL INSTALLATION