Beckett CF1000 Manuel D’Utilisation
4
Form 6104 BCF10-R06
Hazard defi nitions
Intended to bring special attention to information,
but not related to personal injury or property
damage.
damage.
NOTICE
Indicates a potentially
hazardous situation,
hazardous situation,
which, if not avoided, may result in person-
al injury or property damage.
al injury or property damage.
Indicates a potentially
hazardous situation,
hazardous situation,
which, if not avoided, could result in death,
severe personal injury, and/or substantial
property damage.
severe personal injury, and/or substantial
property damage.
Indicates an imminently
hazardous situation,
hazardous situation,
which, if not avoided, will result in death,
serious injury, or property damage.
serious injury, or property damage.
Within the boundaries of the hazard warning, there will
be information presented describing consequences if the
warning is not heeded and instructions on how to avoid
the hazard.
be information presented describing consequences if the
warning is not heeded and instructions on how to avoid
the hazard.
To the Owner:
Thank you for purchasing a Beckett burner
for use
with your heating appliance. Please pay attention to the
Safety Warnings contained within this instruction manual.
Keep this manual for your records and provide it to your
qualifi ed service agency for use in professionally setting
up and maintaining your oil burner.
Safety Warnings contained within this instruction manual.
Keep this manual for your records and provide it to your
qualifi ed service agency for use in professionally setting
up and maintaining your oil burner.
Your Beckett burner will provide years of effi cient opera-
tion if it is professionally installed and maintained by a
qualifi ed service technician. If at any time the burner does
not appear to be operating properly, immediately contact
your qualifi ed service agency for consultation.
qualifi ed service technician. If at any time the burner does
not appear to be operating properly, immediately contact
your qualifi ed service agency for consultation.
We recommend annual inspection/service of your oil
heating system by a qualifi ed service agency.
Agency approvals
UL listed to comply with ANSI/UL296 and certifi ed to
CSA B140.0.
Accepted by N.Y.C. M.E.A.
Other approvals may be available and must be specifi ed at
time of order.
CSA B140.0.
Accepted by N.Y.C. M.E.A.
Other approvals may be available and must be specifi ed at
time of order.
Specifi cations
Fuels
U.S. #1 or #2 heating
oil only (ASTM D396)
Canada #1 stove oil or
#2 furnace oil only
oil only (ASTM D396)
Canada #1 stove oil or
#2 furnace oil only
Firing range
4.0 to 10.0 GPH
Motor
½ HP 3450 RPM
120/60 hz standard
6.5 amps @ 120 VAC
120/60 hz standard
6.5 amps @ 120 VAC
Optional voltages:
(60 hz or 50 hz)
• 240/1-PH
• 208/240/480/3-PH
(60 hz or 50 hz)
• 240/1-PH
• 208/240/480/3-PH
Ignition Trans.
120V/12,000V
Housing
Cast aluminum
Fuel unit
100 - 300 PSIG
Oil nozzle
45° - 70° solid
Shipping wt.
75 lbs.
Dimensions
See Figure 7 (Page 10)
(See NOTICE on 50 hz motor applications.)
LISTED
(FUEL) BURNER
SERIAL NUMBER
050214-00000
Control Circ: 120V/60Hz 4.5A
Motor Circ: 120V/60Hz 4.0A
Model “XX”
Series (Fuel) Burner
R.W. Beckett Corp.
Elyria, Ohio
Made in the U.S.A.
For use with Group 8 . . .
MP 1192 XX000 R00
X
X
X
X
X
X
X
X
X
X
X
XX000 R00
050214-00000
MFR’S SETTINGS
R.W. Beckett Construction & Setting Data
R.W. Beckett Specifi cation
Number and Revision
Number and Revision
Boiler Manufacturer and
Model, When Applicable
Model, When Applicable
Additional Codes
General Model Information
Serial Number,Including Date Code
Rating Information
Approval Agency Symbols
Primary Group and Fuel
L0002