Windsor CDT7IE/10080070 Manuel D’Utilisation
OPERATIONS
CADET 86038340 04/19/07
3-6ENG
Remove electrical cord and literature
from recovery tank. Fill solution tank
(see filling operations, page 3-5).
from recovery tank. Fill solution tank
(see filling operations, page 3-5).
Adjust brush to proper setting. Note:
For good operation the brush must
skim the carpet. If circuit breaker
trips raise brush to prevent damage
to motor or carpet.
For good operation the brush must
skim the carpet. If circuit breaker
trips raise brush to prevent damage
to motor or carpet.
Plug cord into grounded outlet. Note:
Be sure dome is seated on recovery
tank, and float shut-off is installed
correctly.
Be sure dome is seated on recovery
tank, and float shut-off is installed
correctly.
Turn on both Vacuum and Pump
motor switches (“ON”=“I”).
motor switches (“ON”=“I”).
STEP
1
STEP
2
STEP
3
STEP
4
CORRECT
INCORRECT
1/8in
(3mm)
PUMP VACUUM
ON ON