Sterling 882.00291.00 Manuel D’Utilisation

PV 

  8.8.8.8    

Process Value 
Numeric LED 

During normal operation, the process value (PV) 
numeric LED indicator displays the process 
temperature at the To Process thermocouple. It 
also lists parameters during setup and error 
messages if any errors occur. 

SV 

8.8.8.8

 

Set Value  
Numeric LED 

During normal operation, the set value (SV) 
numeric LED indicator displays the process set 
point temperature selected for the dryer. The dryer 
then maintains this set point temperature.  This 
LED indicator also displays parameter and pre-set 
function values during configuration setup. 

OUT1 

Out 1 LED 

Lit when Control Output 1 is on.   The Out1 
indicator lights when the controller signals the 
process heaters to be energized. 

OUT2 

Out 2 LED 

Lit when Control Output 2 is on.  Not used in 
this application. 

 AT 

AT LED 

Flashes during auto-tuning in process value (PV) 
screen.  

 

ALARM1 

ALARM 1 LED 

Lights in the Operation Indicator Section when 
the output function assigned to auxiliary output 
1 turns on.  The ALARM1 indicator lights when 
the process temperature exceeds the set point 
temperature by more than the alarm deviation 
value.  

 

Mode Key 

Press the Mode key to shift the display to the next 
set of parameters. The menu screen displays. 

 

Down Key 

Press the Down arrow key to lower the process air 
set point temperature. During setup, it lets you 
decrease the value of the parameter displayed on 
the set point LED readout. 

 

Up Key 

Press the Up arrow key to raise the process air set 
point temperature. During setup, it lets you 
increase the value of the parameter displayed on 
the set point LED readout. 

15, 30, & 60 cfm Compact Dryers 

 

22