Panasonic CZ-RTC2 Manuel D’Utilisation

EN-4

17.

(Operation mode change control)

indication
Displays when an operation mode is entered
by the remote control unit, while another
operation mode has been already selected.
This indicates that the operation mode cannot
be changed.

18.

(Disabled feature) indication

Displayed if the selected feature was disabled
during installation.

19.

Peak cut mode (Demand)/GHP

operation standby indication
Appears during the peak cut mode (Demand)
if an electric heat pump (EHP) air conditioner
is used or during standby if a gas heat pump
(GHP) air conditioner is used.

20.

(Heating standby mode) indication

Appears when the fan of the indoor unit is
stopped or in low fan speed.

21.

(Fan mode select)

indication
The selected fan mode is displayed.

22.

(Swing) indication

Appears while the fl ap swings.

23.

(Flap position) indication

Indicates the fl ap position.

24.

(Filter) indication

Appears when fi lter needs cleaning. Clean the
fi lter.

25.

(Maintenance function) indication

Appears when the maintenance function
(monitoring sensor temperatures) is activated.

26.

(Ventilation) indication

Appears when a fan available in the market is
installed and is operating.

27.

(Oil) indication

Appears when the engine oil needs to be
changed. (Appears when the gas heat pump
air conditioner is used.)

28.

(Sleeping) indication

Appears during the sleeping function.

29.

(Caution) indication

Appears when the protective device is
activated or when an abnormality occurs.

30. Unit No. indication

Indicates the unit No. of the selected indoor
unit.

31.

(Test) indication

Appears while in test operation.

Display Section

(Refer to page II)

2. Names and Operations (Continued)

CZ-RTC2_Main.indb EN-4

2011/11/04 20:08:01