Vermont Casting 2466 Manuel D’Utilisation

23

Read these instructions carefully and familiarize your-
self with the burner controls. Locate the pilot assembly, 
Figure 45. Follow the lighting instructions on Page 25 
exactly. 
During the first fire, it is not unusual to smell some 
odor associated with new logs, paint and metal being 
heated. Odors should dissipate within an hour or so, 
however, you can open a window to provide fresh air to 
alleviate the condition.

Each time you light your heater check that the pilot 
flame and burner flame patterns are as shown in Figure 
47.  If flame patterns are incorrect, turn the heater off. 
Contact your dealer or a qualified gas technician for as-
sistance. Do not operate the heater until the pilot flame 
is correct.
Follow regular maintenance procedures as described 
on Page 30.

ST769

Dutchwest

pilot location

5/15/03   djt

Pilot Assembly

ST769

Fig. 45  Pilot assembly location.

For stoves equipped with HI/LO valves, flame adjust-
ment is accomplished by rotating the HI/LO adjustment 
knob located near the center of the gas control valve. 
(Fig. 46)

��

��

Turn

counterclockwise

to decrease

flame height

Turn clockwise

to increase

flame height

HV102

Honeywell hi/lo knob

4/5/99   djt

Fig. 46  Flame adjustment knob for Honeywell valve.

It is important to periodically perform a visual check 
of the pilot and the burner flames. Compare them to 
Figure 47. If any of the flames appear abnormal, call a 
service person.

CO105c

Pilot flame

4/10/00   djt

LG142

Stardance

Install logs 2

12/11/00  djt

CO106c

Red 

Glow

LG143

Fig. 47  Correct pilot and burner flame patterns.