Remington QFP40 Manuel D’Utilisation
REMINGTON QFP40 Direct Vent FIREPLACE
Page 20
250-4721 JUNE 2001
INST
ALLA
TION
HEARTH REQUIREMENTS
No clearances to combustible flooring are required for installation of the Remington QFP40,
as referenced in the Clearances to Combustibles on page 7 of this manual.
as referenced in the Clearances to Combustibles on page 7 of this manual.
NOTE: Ensure the depth of your flooring material does not exceed the 1" height at
bottom front flange of the ZC Appliance, illustrated below. Clearance of this area is
necessary in order to allow freedom of movement of the control panel access door when
installed later.
bottom front flange of the ZC Appliance, illustrated below. Clearance of this area is
necessary in order to allow freedom of movement of the control panel access door when
installed later.
Flooring
(tile, wood, carpet)
must lie beneath this edge.
(tile, wood, carpet)
must lie beneath this edge.
Lower front
edge of ZC
Appliance
edge of ZC
Appliance
1"
Right Side of
ZC
Appliance
ZC
Appliance
Left Side of
ZC
Appliance
ZC
Appliance