Soleus Air 3092402 Manuel D’Utilisation

 7 

Timer

Timer

Low

Heat

High

Mode

Power

ON/OFF

Temp./Time

CONTROL PANEL & REMOTE OPERATION 
1.  Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate 

heater in upright position with caster wheels attached.

           

 

2.  Turn the heater on by pressing the On/Off button on the control panel or the supplied remote control. 
3.  Select a heat setting: 

On the control panel, press the MODE button to toggle between the two heat settings; LOW (750W) or 
HIGH (1500W) .  When using the remote control press the HIGH or LOW buttons to select the preferred 
power setting. 

4.  Adjust the thermostat by pressing the TEMPERATURE SELECT buttons (▲ or ▼) on the control panel 

or remote control.  The digital readout will display the selected temperature.  

5.  Once you have chosen the desired temperature, the heater will remain on until the room temperature      

increases to the temperature on the digital display. The heater will cycle on and off to maintain the desired 
room temperature. 

6.  This heater is equipped with a 12-hour automatic shut-off timer.  To activate the timer, press the TIMER 

button on the control panel or remote control.  Each press of the timer button will increase the heater      
operating time by one hour.  The digital readout will display the number of hours you have selected.  To 
turn off the timer, simply press the TIMER button until the digital readout displays your current selected      
temperature. Once you have selected a shut off time, the heater will operate for the selected time, then 
automatically shut off.  

7.  The indication lights on the control panel communicate how the heater is operating.  The TIMER light will 

turn-on when the timer is selected.  When HIGH, LOW modes are selected, the corresponding lights will 
turn on accordingly.  

8.  Unplug the heater when not in use. 
 

 

Heat