Honeywell HZ-7200 Manuel D’Utilisation

READ AND SAVE THESE SAFETY INSTRUCTIONS 

BEFORE USING THIS HEATER.  IF YOU DO 

NOT UNDERSTAND THESE INSTRUCTIONS OR 

PRODUCT LABELS DO NOT USE THIS PRODUCT 

AND CALL US AT (800) 477-0457 FOR AN 

EXPLANATION.

 Failure to follow any of these safety 

instructions could result in fire, injury or death.

Electrical appliances may expose people to hazards 

that can cause severe injury as well as death.  The use 

of electrical products may create hazards that include, 

but are not limited to, injury, fire, electrical shock 

and electrical system damage.  These instructions are 

intended to provide you with the information you need 

to use the product and to avoid such hazards.
1.  Read all instructions before using this heater.

2.  This heater is hot when in use. To avoid burns, do 

not let bare skin touch hot surfaces. If, provided, use 

handle when moving this heater. Keep combustible 

materials, such as furniture, pillows, bedding, 

papers, clothes, and curtains at least 3 feet (0.9 m) 

from the front of the heater and keep them away 

from the sides and rear.

3.  Extreme caution is necessary when any heater is 

used by or near children or invalids, and whenever 

the heater is left operating and unattended.

4.  Always unplug heater when not in use.

5.  Do not operate any heater with a damaged cord 

or plug or after the heater malfunctions, has been 

dropped or damaged in any manner. Return heater 

to authorized service facility for examination, 

electrical or mechanical adjustment, or repair.

6.  Do not use outdoors.

7.  This heater is not intended for use in bathrooms, 

laundry areas and similar indoor locations. Never 

locate heater where it may fall into a bathtub or 

other water container.

8.   Do not run cord under carpeting. Do not cover cord 

with throw rugs, runners, or the like. Arrange cord 

away from traffic area where it will not be tripped 

over.

9. 

 THIS APPLIANCE HAS A POLARIZED 

PLUG (ONE BLADE IS WIDER THAN THE OTHER). 

TO REDUCE THE RISK OF SHOCK, THIS PLUG IS 

INTENDED TO FIT ONLY ONE WAY IN A POLARIZED 

OUTLET. IF THE PLUG DOES NOT FIT SECURELY IN THE 

OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT 

FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT 

ATTEMPT TO DEFEAT THIS SAFETY FEATURE.

10. This heater draws 12.5 amps during operation. To 

prevent overloading a circuit, do not plug the heater 

into a circuit that already has other appliances 

working.

11. It is normal for the plug to feel warm to the 

touch; however, a loose fit between the AC outlet 

(receptacle) and plug may cause overheating and 

distortion of the plug.  Contact a qualified electrician 

to replace loose or worn outlet.

12. To disconnect the heater, first turn off the product, 

then grip the plug and pull it from the wall outlet. 

Never pull by the cord.

13. Do not insert or allow foreign objects to enter any 

ventilation or exhaust opening as this may cause an 

electric shock or fire, or damage the heater.

14. To prevent a possible fire, do not block air intakes or 

exhaust in any manner.  Do not use on soft surfaces, 

like a bed, or where openings may become blocked.

15. A heater has hot and arcing or sparking parts inside.  

The Honeywell trademark is used by Kaz, Inc. under license from Honeywell Intellectual Properties Inc.