Dover Finishing Products 2500 Manuel D’Utilisation
2020/2220/2520/2210/2510/2200/2500
17
03.27883.100
Before adding some extra coals, use the shaker grate or the supplied shovel, and shake
till the glowing parts fall into the ash plate; then add the coals.
After a few minutes, add some more coals until you can only see the glow of the previous
filling.
When the fire basket or the cast-iron plate fins are red-hot, you are heating too in-
tensely.
After a few minutes, add some more coals until you can only see the glow of the previous
filling.
When the fire basket or the cast-iron plate fins are red-hot, you are heating too in-
tensely.
5.5. Ash removal
If your fireplace is equipped with an ashtray (optional), it
must be emptied before the ashes reach the lower edge of
the combustion grid. With the cold handle supplied, you can
tilt the grid upwards and remove the ashtray from the device.
Relatively speaking, burning wood produces little ash and it
will not be necessary to remove it each time daily. Moreover,
wood burns better on a bed of ash.
must be emptied before the ashes reach the lower edge of
the combustion grid. With the cold handle supplied, you can
tilt the grid upwards and remove the ashtray from the device.
Relatively speaking, burning wood produces little ash and it
will not be necessary to remove it each time daily. Moreover,
wood burns better on a bed of ash.
5.6. Extinguishing the fire
Stop fuelling the fire and let it burn out.
You should let the fire burn out and keep an eye on it as long as it is still glowing.
You should let the fire burn out and keep an eye on it as long as it is still glowing.
5.7. Weather conditions
Attention!
Mist and heavy fog will block the chimney's smoke outlet and may lead to smoke
emissions into the living room.
It is best not to use the fireplace under these weather conditions.
Mist and heavy fog will block the chimney's smoke outlet and may lead to smoke
emissions into the living room.
It is best not to use the fireplace under these weather conditions.