Desa VTD-18NV-JHB Manuel D’Utilisation

Page de 20
www.desatech.com
114370-02C
5
LOCAL CODES
Install and use log set with care. Follow all local 
codes. In the absence of local codes, use the lat-
est edition of the National Fuel Gas Code ANSI 
Z223.1/NFPA 54*
*Available from:
American National Standards Institute, Inc.
1430 Broadway
 New York, NY 10018
National Fire Protection Association, Inc.
Battery march park
Quincy, MA 02269
UNPACkINg
 CAUTION: Do not remove the 
data  plates  from  the  grate  as-
sembly. The data plates contain 
important  warranty  and  safety 
information.
1.  Remove log set assembly from carton. Note: Do 
not pick up assembly by logs. This could damage 
unit. Always handle assembly by grate.
2.  Remove control cover floor media components.
3.  Remove all protective packaging applied to log 
set for shipment.
4.  Check all items for any shipping damage. If 
damaged, promptly inform dealer where you 
bought appliance.
PRODUCT FEATURES
This unitized log set is tested and approved to 
ANSI Z21.60-2003 and CSA 2.26-2003 as a vented 
decorative appliance. 
PIEzO IGNITOR
This unit has a piezo ignitor. This system requires 
no matches, batteries or other sources to light 
appliance.
OPTIONAL ACCESSORIES
•  VTD-HLCN/P - Converts valve from ON/OFF 
to HI/LO
•  OFSM-RCN/P - Converts valve from ON/OFF 
to  HI/LO  for  use  with  hand-held  ON/OFF 
remote (included)
•  OF-RC - Converts ON/OFF valve for use with 
hand-held ON/OFF remote
See Accessories, page 17. 
INSTALLATION
 WARNING: Before installing 
in a solid fuel burning fireplace, 
the  chimney  flue  and  firebox 
must be cleaned of soot, creo-
sote, ashes and loose paint by 
a  qualified  chimney  cleaner. 
Creosote  will  ignite  if  highly 
heated. A dirty chimney flue may 
create and distribute soot within 
the house. Inspect chimney flue 
for damage. If damaged, repair 
flue  damper  before  operating 
appliance.
 WARNING: Make sure selec-
tor switch is in the OFF position 
before installing appliance.
NOTICE: Installation, service and 
repair of this appliance must be 
performed by a qualified installer, 
service  agency,  company  or 
gas  supplier  experienced  with 
this type of gas appliance. Only 
factory  authorized  components 
listed in these instructions may 
be used in accordance with the 
manufacturer's instructions and 
all  codes  and  requirements  of 
the authority having jurisdiction. 
Any  modifications  to  or  use  of 
unauthorized  components  or 
accessory  items  will  void  the 
manufacturer’s warranty and may 
result in a hazardous condition.
 WARNING: Do not place lava 
rocks and log scraps on burner.
CHECK GAS TYPE
Use the correct gas type (natural or propane/LP) 
for your unit. If your gas supply is not correct, DO 
NOT install this into your fireplace. See the dealer 
where you bought the appliance for proper type.