Omega Vehicle Security FPU5-MT-220 Manuel D’Utilisation

The peristaltic pump motor offers microprocessor control and a digital display,
and is designed to be fully compatible with our peristaltic pump.  No mounting
plate is needed, just two mounting screws.  A 

1

⁄

10

HP (75W) motor provides flow

rates of up to 2280 mL/minute.  A convenient membrane keypad lets you enter
values and control all pump operations.  A dot matrix LCD provides for easy
view.  Calibrating the unit is easy with the user-friendly control software.
Simply select a tubing size and the desired flow rate, and the pump motor locks
in the required RPM.  Select nominal calibration values stored in ROM (read
only memory) or calibrate via gravimetric measurements.  Fluid temperature
may be displayed (using an optional Type K thermocouple probe).  The last
motor settings are stored in memory when the drives are shut off.

The peristaltic pump motor provides you with four different modes of pumping:

• The RPM Mode

for pumping at a certain RPM setting for
an unlimited period of time

• The FLOW RATE Mode

for pumping at a certain FLOW RATE
setting for an unlimited period of time

• The TIME Mode

for pumping at a certain RPM or FLOW
RATE setting for a specific period of time

• The TOTAL VOLUME Mode

for pumping at a certain RPM or FLOW
RATE setting to dispense a specific amount
of fluid

The pump is available in two versions: 110Vac and 220Vac.

• Digital Display of Flow Rate, RPM, Total Volume, Fluid Temperature (°C or

°F), Flow Duration, or Tube ID

• Ability to Calibrate Precise Flow Rates

• Flow Rates of 1 to 2280 mL/minute 

• Reversible Motor for Pumping in Both Directions at Speeds of 10 to 600 RPM

• Easy-to-Read LCD Display

• Type K SMP Female Thermocouple Input

• Tachometer Feedback, ±0.5% Speed Control

• Accepts Two Pumps, One on Each Side or Two Stacked Together

• Membrane Keypad for Easy Operation and Calibration

• Remote Control Options - 

Aux In: Remote Start/Stop, TTL/CMOS
Aux Out: Open Collector

• Built-in Electronic Braking and Reversing for Fast Stops and Directional

Changes

• Accepts Metric or English Tube Sizes

• Displays Information in English, French, Spanish, German, or Italian