Danby DAC18030 Manuel D’Utilisation

E-

18

◆

Check that the circuit breaker used for the air conditioner has not been

triggered.

◆  

Check that the power cable is plugged into a wall socket and the socket is 

switched on, if necessary. 

◆  

Check that the temperature indicator on the unit is lit; if necessary, 

press the 

(On/Off) button on the remote control or unit.

◆

Check that there are no obstacles between you and the unit.

◆  

Replace the remote control batteries if necessary.

◆  

Check that you are close enough to the unit (seven metres/yards or less).

◆ 

Ventilate the room.

The air conditioner does
not 

operate at all

The air conditioner does not
operate with the remote
control

Odors are permeating the
room during air conditioning

◆

Check that you are pointing the remote control at the remote control sensor 

on the unit.

◆  

Replace the remote control batteries if necessary.

No beep is heard when you
press the

(On/Off) button

on the remote control

◆

Check that the correct operating mode has been selected(Cool).

◆  

The room temperature may be too low.

◆

Dust may be blocking the air filter; refer to page 17 for cleaning instructions.

◆

Check that there is no obstacle blocking the air flow into or out of the unit.

The air conditioner does not
cool

◆

Check that the timer has been programmed correctly; refer to page 12~14.

The timer is not correctly trig-
gered