Friedrich 000 BTU'S Manuel D’Utilisation

Inspect the sleeve and drain system periodically (at least yearly or bi-yearly) and clean of all obstructions and  

debris.

 Clean both areas with an antibacterial and antifungal cleaner. Rinse both items thoroughly with water and 

ensure that the drain outlets are operating correctly. Check the sealant around the sleeve and reseal areas as 

needed.  

Clean the front cover when needed. Use a mild detergent. Wash and rinse with warm water. Allow it to dry 

thoroughly before reinstalling it in the chassis.  

Part 1: The system’s first stage increases energy efficiency utilizing a factory installed fan that slings the cold 

condensate onto the hot outdoor coil.

Part 2: When high outdoor humidity prevents slinger from disposing of all the condensate, the excess condensate 

overflows into the condensate drain pan and out of the 

3/4”

 internal drain connections.

Do  not  drill  holes  in  the  bottom  of  the  drain  pan  or  the 

underside  of  the  unit.  Not  following  this  notice  could 

result in damage to the unit or condensate water leaking 

inappropriately  which  could  cause  water  damage  to 

surrounding property.

If Parts 1 and 2 fail for any reason, excess condensate 

overflows from a spillway directly into the wall plenum to 

the  outside  of  the  building. 

39