GE Monogram AEE18 Manuel D’Utilisation

Page de 16
4
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
About the controls on the air conditioner.
Features and appearance will vary.
MODE CONTROL
TEMP CONTROL
Temp Control
The temp control is used to maintain the
room temperature. The compressor will
cycle on and off to keep the room at the
same level of comfort. Turn the knob
clockwise to Cooler (blue) and the indoor 
air will become cooler. Turn the knob
counterclockwise to Warmer (red) and 
the indoor air will become warmer.
Mode Control
Hi Cool and Low Cool provide cooling with
different fan speeds.
Hi Heat and Low Heat provide heating with
different fan speeds.
Fan Only setting provides air circulation and
filtering without cooling or heating.
NOTE: If you move the mode control from a 
cool setting to Off, a fan setting or a heat 
setting, wait at least 3 minutes before switching 
back to a cool setting.
Cooling Descriptions
For Normal Cooling—Select Hi Cool or 
Low Cool with the temp control at midpoint.
For Maximum Cooling—Select Hi Cool with 
the temp control turned clockwise as far as
possible.
For Quieter & Nighttime Cooling—Select 
Low Cool with the temp control at midpoint.
Heating Descriptions
For Normal Heating—Select Hi Heat or 
Low Heat with the temp control at midpoint.
For Maximum Heating—Select Hi Heat with
the temp control turned counterclockwise as
far as possible.
For Quieter & Nighttime Heating—Select 
Low Heat with the temp control at midpoint.
Circulaire
For continuous
side-to-side air
circulation, set
the Circulaire
switch to On.
For fixed side-to-side air direction, set the
Circulaire switch to On until the desired air
direction is obtained, then move it to Off.
Controls