Weil-McLain Series 1 Fascicule

Weil-McLain

500 Blaine Street

Michigan City, IN  46360-2388

Part Number 550-100-061 1005

5. Top Gasket - Peel back a small portion of the plastic backing off the gasket to expose the adhesive.  

Begin applying the gasket to the top of the boiler as shown in Figure 1.  The gasket should be applied 
around the perimeter of the control pod.

6. Side Gaskets - Peel back a small portion of the plastic backing off the gasket to expose the adhesive.  

Begin applying the gasket to the top of the boiler adjacent to the top gasket as shown in Figure 1.  
Apply the gasket around the corner and down the length of the boiler.  Repeat application for 
remaining side.

7. Bottom Gasket - Peel back a small portion of the plastic backing off the gasket to expose the 

adhesive.  Begin applying the gasket adjacent to the side gasket as shown in Figure 1.  The gasket 
should be one inch below the top of the sheet metal base pan.  Apply the gasket along the front of the 
boiler until it reaches the other side gasket.  Trim the gasket to length to minimize the gaps between 
the gaskets.

8. Reinstall the door and secure it by tightening the two knurled screws.  Restore the electrical and gas 

supplies to the boiler.

9. Restore the boiler to normal operation.

FIGURE 1