Lochinvar 45 Manuel D’Utilisation

Page de 52
4
Installation & Service Manual
Please read before proceeding
 WARNING
To minimize the possibility of serious
personal injury, fire, or damage to your
appliance, never violate the following safety
rules:
1. Boilers are heat producing appliances.  To 
avoid damage or injury, do not store 
materials against the appliance or the 
vent-air intake system.  Use proper care 
to avoid unnecessary contact (especially 
children) with the appliance and vent-air 
intake components.
2. Never cover your appliance, lean 
anything against it, store trash or debris 
near it, stand on it or in any way block 
the flow of fresh air to your appliance.
3. UNDER NO CIRCUMSTANCES must 
flammable materials such as gasoline or 
paint thinner be used or stored in the 
vicinity of this appliance, vent-air intake 
system or any location from which fumes 
could reach the appliance or vent-air 
intake system.
Codes –
The equipment shall be installed in accordance with those
installation regulations in force in the local area where the
installation is to be made.  These regulations shall be carefully
followed in all cases.  Authorities having jurisdiction shall be
consulted before installations are made.  In the absence of such
requirements, the installation shall conform to the latest edition
of the National Fuel Gas Code, ANSI Z223.1.  Where required by
the authority having jurisdiction, the installation must conform
to American Society of Mechanical Engineers Safety Code for
Controls and Safety Devices for Automatically Fired Boilers,
ASME CSD-1.  All boilers conform to the latest edition of the
ASME Boiler and Pressure Vessel Code, Section IV.  Where
required by the authority having jurisdiction, the installation
must comply with the Canadian Association Code, CAN/CGA-
B149.1 and/or B149.2 and/or local codes.
This appliance meets the safe lighting performance criteria with
the gas manifold and control assembly provided as specified in
the ANSI standards for gas-fired appliances, ANSI Z21.13 and
ANSI Z21.10.3.