Emerson SST1400 Manuel D’Utilisation
9
REPLACING AN IONIZING WIRE
REPLACING AN IONIZING WIRE
REPLACING AN IONIZING WIRE
REPLACING AN IONIZING WIRE
REPLACING AN IONIZING WIRE
If an ionizing wire should break, it can be replaced as
follows:
follows:
1.
Remove all pieces of broken wire. Make sure sup-
ports at each end are in good condition and not bent
out of shape.
ports at each end are in good condition and not bent
out of shape.
2.
Hook the new wire onto the support at one end.
3.
Hold your finger against the support at the other end
(Figure 21) and hold the ionizing wire between thumb
and forefinger as shown or use needle nose pliers.
Press inward on spring support. Hook end of wire over
small tab at end of support and release. Make sure
wire is securely anchored at each end.
(Figure 21) and hold the ionizing wire between thumb
and forefinger as shown or use needle nose pliers.
Press inward on spring support. Hook end of wire over
small tab at end of support and release. Make sure
wire is securely anchored at each end.
Support
Ionizing
Wire
Wire
Figure 21
Rated Capacity
600 - 1200 cfm
1000 - 1600 cfm
1000 - 2000 cfm
1600 - 2200 cfm
Max. Pressure Drop
.08 in. W.G.
.08 in. W.G.
.12 in. W.G.
.09 in. W.G.
Cell Weight
(2) 7 lbs. each
(2) 9 lbs. each
(2) 9 lbs. each
(2) 9 lbs. each
Power Pack Weight
9 lbs.
9 lbs.
10 lbs.
10 lbs.
Unit Weight
35 lbs.
42 lbs.
38 lbs.
45 lbs.
Power Consumption
40 Watts (Max)
40 Watts (Max)
40 Watts (Max)
40 Watts (Max)
Electrical Input
120 VAC 60 hz.
120 VAC 60 hz.
120 VAC 60 hz.
120 VAC 60 hz.
Electrical Output
1.0 Ma
1.2 Ma
1.5 Ma
1.7 Ma
@ 6450 VDC (nom)
Max. Ozone Output
.05 ppm
.05 ppm
.05 ppm
.05 ppm
Temperature Rating
40 F to 125 F
40 F to 125 F
40 F to 125 F
40 F to 125 F
SPECIFICATIONS
SST1000
SST1400
SST1600
SST2000
SPECIFICA
SPECIFICA
SPECIFICA
SPECIFICA
SPECIFICATIONS
TIONS
TIONS
TIONS
TIONS