New Buck Corporation 261 Manuel D’Utilisation

1.  Inspect the unit for any obvious physical damage. 

 

2.  Plug the power cord into a 115V AC outlet to test the  motor and fan when optional motor is 

being used. “Do not run power cord under unit or in high traffic areas”. 

 

3.  Check the primary air draft control to ensure that it  slides freely. 

 

4.  Remove any items from within the firebox.  Spread  a  dropcloth  on the floor behind the 

heater.  Next, tilt the heater  so that the back is on the drop cloth.  

 

5.   Then obtain four legs, attach the legs to holes in bottom of unit with bolts and washers  
      supplied with the leg kit. (See  Figure 35).   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
                                                                   Figure 33.  

    

 

6. Reposition the heater to the upright position. 

 

 

7. Next fasten New Buck’s Cast Collar Part number MA6CHIMCNB to the flue exit of stove to  
    be used, using the J hook’s provided. Position collar with gasket  towards the unit, tighten the   
    J hook’s  Firmly secured. (See Figure 36). 

 

8. Fasten New Buck’s Flue Collar Plate to the exit not used for burning stove. Firmly secure the   
    Flue Collar Plate Bracket with the nut and washer provided .(See Figure 36). 
     
   
 
 
 
 
 
 
 
 
 
 
                                                           

 

 

     

                                                                 Figure 34.                                                         
9 .  Now the stove is ready to be positioned in the predetermined location.                                       
                                                                                 
 

40