Heartland 3630 Manuel D’Utilisation

Metro / Legacy Series

(please read all steps prior to setting the regular convection function)

1.

Press        convection symbol. (temperature is automatically set at 325F or 160C and the
       convection indicator light begins to flash)

2.

Press      increase or      decrease symbols to change temperature setting. Temperature may
be set between 100F to 550F or 37C to 290C. (fast scrolling begins after holding     increase
or      decrease symbol keys for over 5 seconds)

3.

Press          start symbol to begin regular convection function.         convection indicator
light will glow.  After 5 seconds the time of day and temperature in oven will be displayed.
Temperatures will be displayed in increments of 5F or 5C until programmed temperature is
reached.

4.

Once set temperature is reached, an audible signal will sound.

5.

Press        cancel symbol to end regular convection  function at any time.
       convection indicator light and temperature display will go off.  Only time of day will be
displayed.

Note:
1.

To verify oven temperature while the oven is heating up, press        convection symbol.
Information will be displayed for 5 seconds.

(please read all steps prior to setting the timed convection function)

1.

Press         convection symbol (temperature is automatically set at 325F or 160C and the
        convection indicator light begins to flash)

2.

Press     increase or      decrease symbols to change temperature setting. Temperature may be
set between 100F to 550F or 37C to 290C. (fast scrolling begins after holding     increase or
decrease     symbol keys for over 5 seconds)

3.

Press         cook time symbol. (timer will display 00:00 and          cook time indicator will
begin to flash)

4.

Press      increase symbol until desired cook time is set. (fast scrolling begins after holding
    increase symbol key for over 5 seconds)