Fusion INTELPage IP 5 Manuel D’Utilisation

Fusion Intelpage IP 

 

Manual 

Page 

34

 

 

© Commtech

Wireless

 

•  Frequency Band – After the Intelpage IP unit has read the data from the internal 

transmitter, it will display the band of the radio inside. This will either be 148-
174MHz or 440-470MHz 

•  Frequency – Here you can type the frequency required for the site. For example if 

your pagers are operating on 450.325MHz, then you would type in 450325000. 

•  Power Level – Use the drop down menu to toggle between Low, Medium or High 

power levels. These values typically correspond to power output levels of 500mW, 
2W and 5W respectively. 

•  Channel Spacing - This field refers to the space between adjacent channels. In the 

majority of applications, 25kHz should be selected here (for ±4.5kHz FSK). If you are 
using pagers capable of narrow band (±2.5kHz FSK) you can select 12.5kHz in this 
field.