Avalon Stoves Avalon Pellet Stove Astoria PS Manuel D’Utilisation

4050225

Manual mode requires the user to turn the
heater on and off manually.

Press the "Manual Start" button.  That's it.  The
stove automatically goes to a medium burn rate
and high fan while the igniter starts the fire
burning within 10 minutes.  During this period
the lowest “HEAT OUTPUT” light will flash.  If
the stove does not start in 30 minutes, the
stove turns off.

Once up to temperature, the stove will then
run at the heat output setting selected on the
control panel (see “To Adjust the Heat” below).

Move the mode switch to "OFF".  The exhaust
blower will still run until the heater cools down.

Press the "Heat” buttons to adjust the heat
output.

NOTE: During start-up you may adjust the heat
setting.  This heat setting will take affect once
the start-up sequence is complete.

These lights 
indicate the 
heat output 
setting.

NOTE: the 
lights may 
be difficult to 
see from an 
angle.

Press the 
“up” or 
“down” 
button to 
adjust the 
heat output.