Avalon Stoves Avalon Pellet Stove Astoria PS Manuel D’Utilisation

4050225

The door hinge and door latches may be adjusted to pull the door closer to the body.  The
illustration below details how to adjust these components.  NOTE: Make sure to read the section
"Door Alignment" on the previous page before adjusting the door.

Open the hopper lid 

and remove the two 

screws holding the 

side doors in place.

Loosen the lock nut and twist 

the pawl (clockwise to tighten, 

counter-clockwise to loosen). 

Tighten the lock nut to secure 

in place.

Door

Bracket  (attached to side of 

heater)

Lock Nut

Pawl

Door Hinge Bracket

Door

Hinge Adjusting Plate

(1) With the door closed, loosen the 

two bolts going through the door 

hinge bracket.

(2) Loosen the four nuts used to 

move the hinge adjusting plate. 

Tighten or loosen these nuts to 

adjust the door hinge bracket.  Adjust 

the upper and lower nuts equally to 

insure the door remains level.  

Tighten the four nuts.

(3) Tighten the two bolts loosened in 

Dimple (used to monitor hinge 

bracket position)