Midland Radio 1001Z Manuel D’Utilisation
5
Usually, the fuse block is the most convenient connecting point. It is also
possible to connect to the Accessory terminal on the fuse block or ignition
switch, so that your CB automatically goes off when the ignition goes off.
switch, so that your CB automatically goes off when the ignition goes off.
B. Tightly connect the ground (BLACK WIRE) directly to the vehicle’s metal
frame. A good direct metal-to-metal ground is essential for optimum
performance.
frame. A good direct metal-to-metal ground is essential for optimum
performance.
,
Installations using the cigarette lighter socket for power require an extra ground
wire from the radio chassis to the vehicle if the radio is not fastened to a
grounded part of the vehicle.
wire from the radio chassis to the vehicle if the radio is not fastened to a
grounded part of the vehicle.
Installation of microphone hanger.
Mounting holes are provided on the microphone hanger bracket. The bracket
can be attached to the vehicle dash, the holes provided on the left side of the
radio, or other convenient location.