Frigidaire DGGF3032KB Manuel Du Propriétaire

26

Be sure the oven is unplugged and all parts are COOL 

before replacing the oven light bulb. Do not turn 

the oven light on during a self-cleaning cycle. High 

temperature will reduce lamp life.

On some models an interior oven light will turn on 

automatically when the oven is opened. The oven light 

may be turned on when the door is closed by using the 

oven light switch located on the Electronic Oven control. 

The oven light bulb is covered with a glass shield held 

in place by a wire holder. THIS GLASS SHIELD MUST 

ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE.

To Replace the Light Bulb:
1.  Turn the power off at the main source.

2.  Wear a leather-faced glove for protection against 

possible broken glass.

3.  Replace bulb with a 40 

Watt appliance bulb only.

4.  For self-cleaning oven, 

press wire holder to one 

side to release glass 

shield, change bulb and 

be sure to replace glass 

shield.

Each oven is equipped with an oven light. The oven light will 

turn on automatically, when the oven door is opened. 
The oven light may be turned on when the door is closed by 

using the oven light pad located on the control panel. The 

oven light key will toggle the lights at full intensity.

1.  Press uPPer oven or loWer oven to select oven.

2.  Press oven ligHt 

The interior oven lights are covered with a glass shield held 

by a wire holder. The glass shield must be in place whenever 

the oven is in use.
To change the interior oven lights, see “Changing the oven 

light” in the care & cleaning section.