Jensen VM9324 Manuel D’Utilisation

12

Press the rotary encoder button (1) on the front panel or the MUTE button (3) 
on the remote to mute the volume from the unit. Press the rotary encoder 
button again to restore the volume. “MUTE” is displayed on the LCD. Adjusting 
the volume or using any of the audio setup features cancels the mute function.

If the “MUTE” wire is connected, audio output mutes when a telephone call is 
received by the car phone (using optional BTM15) or when verbal navigation is 
played (using optional NAV102).

When the monitor is closed, press the SRC button on the front panel (2) or 
remote control (8) to change between available audio playing sources in the 
following order: RADIO, DISC, USB/iPod, SD, BT, NAV, SAT, AUX1, AUX2 and 
CAMERA. The mode is displayed on the LCD screen.

You can also use the touch screen to change the source through the SOURCE 
MENU. To access the SOURCE MENU, touch the top left corner of the screen 
or press the SRC button on the front panel (2) or remote control (8). 

Touch the RADIO, DISC, USB/iPod, SD, BT, NAV, SAT, AUX1, AUX2 or 
CAMERA button to select the corresponding source.

You can also use voice control to select a source. See “iPod Voice Control” 
on page 16.

EQ