England's Stove Works 10-CDV Manuel D’Utilisation

 

9

 

 

Ashes will need to be removed from the unit periodically. See Ash Removal section. You can 
minimize cleaning required and maximize efficiency by maintaining the proper draft. 

 

This unit has been designed to burn dry shelled corn or premium hardwood pellets that meet the 
association of pellet fuel industry standards. 
Shelled corn (dry, preferably corn with 11-12% moisture content) 

 

Never burn “deer corn” as it frequently contains molasses/sugars. 
Store your corn supply in a dry place and keep bags or container sealed to prevent your corn from 
absorbing excess moisture. Test the moisture content regularly to ensure proper dryness. 

 

IMPORTANT:  DO NOT BURN “TREATED” SEED CORN IN YOUR STOVE. Seed corn is treated 

with chemical pesticides that are harmful or fatal if swallowed; therefore, seed corn is 
dangerous to have in the house, especially where children can reach it. Burning 
treated seed corn in your stove will void your warranty and will destroy the 
exhaust system on the unit. 

 

As with corn, be consistent in your choice of wood pellet supplier.  Pellets will vary in content and 
burn characteristics from supplier to supplier. 

 

•  Check your pellets for foreign objects. Your stove warranty will not cover any damage caused 

due to foreign objects in the fuel supply. 

 

•  Store your pellets in a dry place to prevent them from absorbing added moisture. 

 

•  To decrease sawdust buildup, the hopper will need to be vacuumed out after every 6-8 bags of 

pellets, or more often if the quality of the pellets are poor. You may need to screen each bag of 
pellets if the sawdust becomes a problem. 

 

•  Wood pellets vary in size and also ash content (from less than 1% to 3% or more). Your unit will 

burn more efficiently with small to mid-size pellets. Low ash content pellets will allow you to burn 
the stove longer between cleanings. 

 

•  Your unit is designed to burn pellets that are no larger than one-quarter inch (¼”) in diameter, 

and no longer than two and one-half inches (2 ½”) long.   

 

 

 

•  Warning:  Do not open the door on this unit if the stirrer is still moving!  

The stirrer may be turned Off by pushing the “Air On” button on the bottom of the Control 
Panel, and then pressing the Down arrow on the “Blower Speed” until you see a “0” in the 
Blower Speed window.   

The stirrer may be turned back On by pressing the “Air On” button on the bottom of the 
Control Panel, and then pressing the Up arrow on the “Blower Speed” until you see a “1” in 
the Blower Speed window.