Lightolier 302ESICX Fascicule

Page de 1
03-03
3 3/4" (95mm) aperture
Lytecaster 
Line Voltage 120V ES/ESD16
Recessed Downlight
IC Frame-In-Kit
 
 
 
Complete fixture consists of Reflector Trim & Frame-in Kit. Select each separately
POWER PACK
CUT-OUT
302ESICX
3 3/4" (95mm)
Accepts most 3 3/4" (95mm) 300 serie trims ; see Reflector
Trim specification sheets.
 Features
 Accessories
Mounting Frame : 20ga. galvanized steel. Four slots are positioned  90º
Mounting Bars Extenders : 1964
apart to simplify alignment.
20" (508mm) long. Set of 2
Insulated Ceiling Housing : 26ga. galvanized steel. CSA certified and UL
listed for direct contact with thermal insulation.
Mounting Bar Locking Clips : 0098
Internal thermal cut-out : insures against overheating due to incorrect lamping.  
To lock mounting bars in place after installation. Set of 12.
Mounting Bars: (4) 18 ga. galvanized steel. 13" (330mm) long bars extend to
27" (686mm), rotatable and lockable, integral T-bar tabs. Spike detail
Vapor Barrier Extender : VBE300
eliminates the need of additional nailing. 
Polyvinyl Air Vapour Barrier ; to comply with provincial legislation. For all
Mounting Bars Locking Clip : (1) locks mounting bars in place. 
non Air-Seal frame-In-Kits.
Socket :  Porcelain body ; Twist and lock (GZ base) Pre-wired with 18 ga. Teflon
250º leads to junction box. 
Junction Box : 4"(102mm) x 3"(76mm) x 2"(51mm) 18 ga. galvanized steel .
CSA/UL certified for maximum of  8 No. 12 ga. 90º C through branch circuit
conductors. Integral cable clamp permit attachment of  non metallic Loomex
without need of additional connectors. Pry-out knock-outs accept BX cable.
Easy access from both sides with snap-on covers.
 Labels : CSA , UL
Damp or Wet location rated depending on trim used.
WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN,  MATERIALS AND FINISH, IN ANY WAY
THAT WILL NOT ALTER INSTALLED APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.
Lightolier CFI, 3015 Louis Amos Lachine, (Quebec) H8T 1C4
 REFLECTOR TRIM
302ESICX