Lightolier PRISTINE Fascicule

     

9

1

/

4

"

12"

6"

from the back edge

.149" diameter
#25 drill

3  Ensure that circuits to which the lights are connected 

are properly grounded and are the correct voltage.

4  To prevent wiring damage or abrasion, do not expose 

wiring to edges of sheet metal or other sharp objects.

1  All electrical installations must be done by 

qualified personnel in accordance with codes 
regulations applicable at the installation site.

2  Before beginning work, ensure that electrical 

power has been removed from the circuits that 
are being connected to or disconnected from.

1

Position the light’s keyhole slots over the screws, shift right to engage.

Find the center and mark holes as indicated. Drive screws into binder bin 
or shelf with shoulder washers. (Do not over drive screws)

2

For Dimming Units Only:
• Press and release button 

for on/off.

• Press and hold to dim.
• Release to set dimming level.

keyhole

939504881 Rev B