Lightolier SL111A2 Manuel D’Utilisation
Features
Ballast Channel: 0 05" (1.3mm) min. thick, 1-1/2" x 1-1/2" (38mm x 38mm) brushed
and anodized extruded aluminum ballast channel. Provided with knock-cuts arc
threaded holes to accept all mounting accessories.
Channel Cover: 0.04" (1mm) thick brushed and anodized aluminum ballast cover
Press-fit installation. No visible hardware.
Multi-fonction Bloc (2): Solid brushed and anodized aluminum finish. Retains
lampholder housing to the ballast channel. Also functions as a wireway for continious
rows and patterns
Lampholder Housing (4): 0.08" (2mm) min thick, 1" (25mm) square brushed and
anodized aluminum with turret style locking socket.
Plug Insert (2): 0.56" (14mm) dia. 0.31" (8mm) min. deep. Solid brushed and
anodized aluminum finish. Hide the holes at each end of ballast channel when
luminaire is not row mounted.
and anodized extruded aluminum ballast channel. Provided with knock-cuts arc
threaded holes to accept all mounting accessories.
Channel Cover: 0.04" (1mm) thick brushed and anodized aluminum ballast cover
Press-fit installation. No visible hardware.
Multi-fonction Bloc (2): Solid brushed and anodized aluminum finish. Retains
lampholder housing to the ballast channel. Also functions as a wireway for continious
rows and patterns
Lampholder Housing (4): 0.08" (2mm) min thick, 1" (25mm) square brushed and
anodized aluminum with turret style locking socket.
Plug Insert (2): 0.56" (14mm) dia. 0.31" (8mm) min. deep. Solid brushed and
anodized aluminum finish. Hide the holes at each end of ballast channel when
luminaire is not row mounted.
Options and Accessories
Emergency Lighting: Electronic Bodine slim profile battery pack. The emergency
ballast senses the power failure and immediately switches to emergency made
by illuminating the lamp at a reduced lumen output for a minimum of 90 mins. The
battery fully recharges within 24 hours. Add suffix (EM) to the catalogue numbers.
DALI Interface: Digital Addressable Lighting Interface available upon request
for individual luminaires. Ballast 120 volts or 277 volts only. Consult your
Lightolier representative.
ballast senses the power failure and immediately switches to emergency made
by illuminating the lamp at a reduced lumen output for a minimum of 90 mins. The
battery fully recharges within 24 hours. Add suffix (EM) to the catalogue numbers.
DALI Interface: Digital Addressable Lighting Interface available upon request
for individual luminaires. Ballast 120 volts or 277 volts only. Consult your
Lightolier representative.
Markings
cULus Listed Suitable for damp locations.
Mounting
Direct Mount: Square canopies or invisible feed suitable for plaster ceiling, exposed
ceiling or suspended ceilings mounts.
ceiling or suspended ceilings mounts.
KUBIK 1.5
SL111A2
Page 1 of 4
Bare Lamp Flush Unit
Dimensions
Lightolier
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A2.pdf
Canlyte
www.canlyte.com
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Suspended Mount: Single stem or aircraft cable with round canopy suitable
for mounting on a standard outlet box for plaster ceiling exposed installation
or suspended ceilings mounts. Stem and cable mounts can both be used on the
same luminaire.
Patterns: Suitable for different patterns in continuous row mounting.
for mounting on a standard outlet box for plaster ceiling exposed installation
or suspended ceilings mounts. Stem and cable mounts can both be used on the
same luminaire.
Patterns: Suitable for different patterns in continuous row mounting.
Electrical
Ballast: Electronic slim profile 1 lamp 28W T5 or 54W T5H0 Iinear ballast.
U: Universal voltage ballast automatically detects 120V to 277V, 50 or 60Hz
operations.
1: 120V ballast only.
2: 277V ballast only.
H: 347V ballast only.
Lampholder: G5 plug-in base, miniature Bi-pin.
U: Universal voltage ballast automatically detects 120V to 277V, 50 or 60Hz
operations.
1: 120V ballast only.
2: 277V ballast only.
H: 347V ballast only.
Lampholder: G5 plug-in base, miniature Bi-pin.
Finish
Natural brushed and anodized aluminum. All painted parts are powder coat
paint process.
paint process.
Ordering guide
(complete luminaire consist of unit & power feed)
Unit/Louver Cat. No.
Lamp (linear)
Volts
Ballast Type
Finish
SL111A228PIU
120/277V
SL111A228PIH
2 -28W T 5
347V
Programmed Rapid Start
SL111A254PIU
120/277V
SL111A254PIH
347V
Brushed and Anodized Aluminum
SL111A254MZ1
2-54W T5 HO
120V
SL111A254MZ2
277V
Dimming Mark 10
SL111A254PCU
120/277V
Dimming PowerSpec HDF
46-3/16"
(1173mm)
3-1/2"
(89mm)
1"
(25mm)
1-1/2"
(38mm)
Ballast Channel
Channel Cover
Lampholder Housing
Multi-Function Block
Plug Insert
Lightolier is a Philips group brand