Lightolier C3MRGD Fascicule
Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • D1107
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • D1107
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
Evolution Glasslite Downlight
C3MRGD
Page 1 of 2
3" Aperture, MR16 (12V)
Spec. Sheet
C3MRGD
1/2"
(13mm)
2" (59mm) Max.
Ceiling Thk.
2 3/4" (70mm) Dia.
4" (102mm) Dia.
C3LV
Vertical Adjustment
1" (25mm) to
2 3/4" (70mm)
9 1/2"
(242mm)
9"
(229mm)
1/2" (13mm)
C3AICLV
10
4
1
2
3
6
7
9 8
5
5 1/2"
(140mm)
5"
(127mm)
Plus Ceiling
Thk.
5" (127mm)
12 5/8"
(321mm)
14 3/8"
(365mm)
9 5/8"
(245mm)
5" (127mm)
14 3/8"
(365mm)
10 1/8"
(257mm)
9" (229mm)
11 3/16"
(284mm)
22 3/8"
(568mm)
Non-IC:
C3LV
C3LVE1
C3LVE2
Non-IC AirSeal:
C3ALV
C3ALVE1 C3ALVE2
IC AirSeal:
C3AICLV C3AICLVE1
14 5/8"
(372mm)
Spec. Sheet
C3MRGD
IC AirSeal Frame:
C3AICLV
C3ALCLVE1
C3AICLV
C3ALCLVE1
Features
1. Glasslite: One piece borosilicate glass with interal flange, etched interior
and white ceramic coated exterior. Etched white cone finish emits a subtie
glow. Hinged, and snaps on for easy tool-less installation. Interchangeable
with other 3" Evolution trims. Suitable for shower and other wet environments.
glow. Hinged, and snaps on for easy tool-less installation. Interchangeable
with other 3" Evolution trims. Suitable for shower and other wet environments.
2. Lamp Support: Die-form aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast
snap-in, snap-out relamping. Matte black finish. Accepts up to two 2" diameter
accessories.
snap-in, snap-out relamping. Matte black finish. Accepts up to two 2" diameter
accessories.
3. Cover Glass: High temperature, clear lens.
4. Thick Ceiling Ready Brackets: Die-form steel, matte black finish. Adjust
4. Thick Ceiling Ready Brackets: Die-form steel, matte black finish. Adjust
trim kit vertically to accommodate up to 2" thick ceiling, lockable.
5. Lampholder: Procelain bi-pin socket. Pre-wired with No.18 AWG Teflon leads.
6. Horizontal Adjustment Mechanism: Built-in ready for adjustable trim, matte
6. Horizontal Adjustment Mechanism: Built-in ready for adjustable trim, matte
black finish.
7. Frame Vertical Adjustment Mechanism (C3LV): Accommodates mounting
to virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking features secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below inside fixture.
tubing (by others). Single locking features secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below inside fixture.
8. Mounting Bars (C3LV): Galvanized steel, 0.048"; pre-installed telescoping
bars extend from 20" to 30" long and lock securely into position. Built-in locking
tabs provide positive attachment to common T-bar systems. Self-centering
feature simplified installation in 24"O.C. grid systems. Attaches to steel or
wood joists without accessories.
tabs provide positive attachment to common T-bar systems. Self-centering
feature simplified installation in 24"O.C. grid systems. Attaches to steel or
wood joists without accessories.
9. Transformer: Replaceable from below. Magnetic: 120V/277V 60 Hz. dual-
voltage, core & coil.
Note: Magnetic not recommended for residential or noise
sensitive areas. Electronic: 120V or 277V 50/60 Hz., regulated lamp
voltage, HPF, , EMI and circuit protections, thermal auto-reset, quiet operation.
voltage, HPF, , EMI and circuit protections, thermal auto-reset, quiet operation.
10. Frame-In Kit: See Frame-In Kit specification sheets for more information.
Non-IC and Non-IC AirSeal - Insulation must be kept 3"away from any parts of
the luminaire and must not be placed above luminaire in a manner which will
entrap heat.
IC AirSeal - Luminaire may be in direct contact with thermal insulation.
the luminaire and must not be placed above luminaire in a manner which will
entrap heat.
IC AirSeal - Luminaire may be in direct contact with thermal insulation.
Labels
U.L. (Suitable For Wet Locations), I.B.E.W.; U.S. & Foreign Patents Pending
*Lamp wattage restriction for Non-IC: 65W for up to 1" thick ceiling, 50W
*Lamp wattage restriction for Non-IC: 65W for up to 1" thick ceiling, 50W
for ceiling thickness greater than 1" (up to 2").
Options and Accessories
2" dia. Color Filters/Specialty filters: See ADF2/AF2 specification sheets
2" dia. Louver: AL2HC
Chicago Plenum: Consult Factory
2" dia. Louver: AL2HC
Chicago Plenum: Consult Factory
Ceiling Cutout: 3 1/2" (130mm) Dia.
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
Trim Kit
Frame-In Kit
Lamp*
Etch White Glasslite
C3MRGD
C3LV
Non-IC
Magnetic 120/277V
42W-65W MR16 (12V)
C3LVE1
Non-IC
Electronic 120V
20W-65W MR16 (12V)
C3LVE2
Non-IC
Electronic 277V
20W-65W MR16 (12V)
C3ALV
Non-IC AirSeal
®
Magnetic 120/277V
42W-65W MR16 (12V)
C3ALVE1 Non-IC AirSeal
®
Electronic 120V
20W-65W MR16 (12V)
C3ALVE2 Non-IC AirSeal
®
Electronic 277V
20W-65W MR16 (12V)
C3AICLV
IC AirSeal
®
Magnetic 120V
20W-50W MR16 (12V)
C3AICLVE1 IC AirSeal
®
Electronic 120V
20W-50W MR16 (12V)
Note: Magnetic not recommended for residential or noise sensitive areas.
Non-IC Frame:
C3LV
C3LVE1
C3LVE2
C3LV
C3LVE1
C3LVE2
Non-IC AirSeal Frame:
C3ALV
C3ALVE1
C3ALVE2
C3ALV
C3ALVE1
C3ALVE2