Lightolier 4SB224 Fascicule
45°
6
5
4
3
4SB235
A
B
C
Pendant Dia.
Architectural Decorative
4SB224
(28) (35) (42)
Page 1 of 1
Pendalux Suspension Multiple Stem Swivel Basic Canopy
Job Information
Type:
Job Name:
Cat. No.:
Cat. No.:
Lamp(s):
Notes:
Notes:
Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
©2005 Genlyte Group LLC • B0305
We reserve the right to change details of design, materials and finish.
©2005 Genlyte Group LLC • B0305
Specifications
1. Suspension Size: For optimum performance, testing recommends luminaire
total OAL (overall length) in proportion to the Body diameter. For close-to-
ceiling mounting, it is suggested to use shorter single stems as noted on
Spec Sheet SB115. Total luminaire OAL is defined from the bottom of the
diffuser to ceiling plane.
ceiling mounting, it is suggested to use shorter single stems as noted on
Spec Sheet SB115. Total luminaire OAL is defined from the bottom of the
diffuser to ceiling plane.
2. Stem Wires: Equipped with 120” of leads with keyed connectors for quick
connection to Body wiring.
3. Suspension: Swivel (central) stem, 5/8” steel tube. Die-Cast Ball hanger
attached.
4. Multiple Stems: 3/8” Steel outer pipe stems go into a
collector plate. Outer stems surround central 5/8” stem.
5. Mounting Strap (Cross Bar): Die-formed galvanized steel.
6. Canopy: Steel, 7” diameter, fastened internally, no exposed hardware. Ball
6. Canopy: Steel, 7” diameter, fastened internally, no exposed hardware. Ball
hanger on stem that fits into cross bar allows installation on ceilings with
slope up to 45 degrees. Complies with California Earthquake Code.
slope up to 45 degrees. Complies with California Earthquake Code.
7. Cutting Jig: All suspensions are equipped with a Patent Pending cutting
jig that simplifies cutting of center stem pipe in the field.
Options & Accessories
If a longer overall length is desired, use a Suspension paired with a larger Body.
If an overall length of greater than 42" is desired, use an Extension Stem. Order
as a third additional component to make complete fixture. Please see
Specification Sheet No. 4SXT.
as a third additional component to make complete fixture. Please see
Specification Sheet No. 4SXT.
Complete Luminaire consists of Body and Suspension: Order each separately.
Multiple Stem Suspension, with Swivel, Basic Canopy.
Catalogue
Nominal Overall
Nominal
Suspension (Center Stem)
Number
Length (A)*
Length (B)*
and Canopy Finish
4SB224PB
17 7/8”
13 3/8”
Polished Brass
4SB224SB
17 7/8”
13 3/8”
Satin Brass
4SB224SN
17 7/8”
13 3/8”
Satin Nickel
4SB224WH
17 7/8”
13 3/8”
White
4SB228PB
21 11/16”
16 1/4”
Polished Brass
4SB228SB
21 11/16”
16 1/4”
Satin Brass
4SB228SN
21 11/16”
16 1/4”
Satin Nickel
4SB228WH
21 11/16”
16 1/4”
White
4SB235PB
27 5/16”
20 1/2”
Polished Brass
4SB235SB
27 5/16”
20 1/2”
Satin Brass
4SB235SN
27 5/16”
20 1/2”
Satin Nickel
4SB235WH
27 5/16”
20 1/2”
White
4SB242PB
32 5/8”
24 1/2”
Polished Brass
4SB242SB
32 5/8”
24 1/2”
Satin Brass
4SB042SN
32 5/8”
24 1/2”
Satin Nickel
4SB042WH
32 5/8”
24 1/2”
White
* Add this length (A) to Body length (C) from Body Spec Sheet(s) to get Total Luminaire Nominal OAL.
Mounting
Mounts directly to 4" outlet box, using crossbar hanger, supplied.
Note: Additional Luminaire support plate provided with 35/42”Dia. Body to
allow Luminaire to be supported independent of outlet box.
allow Luminaire to be supported independent of outlet box.
Labels
cULus Listed, suitable for Damp Locations.