Lightolier 4SB115 Fascicule
45°
5
4
3
Nominal
OAL
Body Dia.
A
C
Architectural Decorative
4SB115
(18) (21)
Page 1 of 1
Pendalux Suspension Single Stem Short (Close to Ceiling) Basic Canopy
Job Information
Type:
Job Name:
Cat. No.:
Cat. No.:
Lamp(s):
Notes:
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Specifications
1. Suspension Size: For optimum performance, testing recommends luminaire
total OAL (overall length) in proportion to the Body diameter. For close-to-
ceiling mounting, it is suggested to use shorter single stems as noted on
Spec Sheet SB115. Total luminaire OAL is defined from the bottom of the
diffuser to ceiling plane.
ceiling mounting, it is suggested to use shorter single stems as noted on
Spec Sheet SB115. Total luminaire OAL is defined from the bottom of the
diffuser to ceiling plane.
2. Stem Wires: Equipped with 120” of leads with keyed connectors for quick
connection to Body wiring.
3. Suspension: Swivel (central) stem, 5/8” steel tube. Die-Cast Ball hanger
attached.
4. Mounting Strap (Cross Bar): Die-formed galvanized steel.
5. Canopy: Steel, 7” diameter, fastened internally, no exposed hardware. Ball
5. Canopy: Steel, 7” diameter, fastened internally, no exposed hardware. Ball
hanger on stem that fits into cross bar allows installation on ceilings with
slope up to 45 degrees. Complies with California Earthquake Code.
slope up to 45 degrees. Complies with California Earthquake Code.
6. Cutting Jig: All suspensions are equipped with a Patent Pending cutting jig
that simplifies cutting of center stem pipe in the field.
Options and Accessories
If a longer overall length is desired, use a Suspension paired with a larger Body.
If an overall length of greater than 42" is desired, use an Extension Stem. Order
as a third additional component to make complete fixture. Please see
Specification Sheet No. 4SXT.
as a third additional component to make complete fixture. Please see
Specification Sheet No. 4SXT.
Complete Luminaire consists of Body and Suspension: Order each separately.
Short (Close to Ceiling) Single Stem Suspension, with Swivel, Basic Canopy.
Catalogue
Suggested Use
Nominal Overall
Suspension (Stem) and
Number
with Luminaire dia.
Length (A)*
Canopy Finish
4SB115PB
23” or 28”
8 7/8"
Polished Brass
4SB115SB
23” or 28”
8 7/8"
Satin Brass
4SB115SN
23” or 28”
8 7/8"
Satin Nickel
4SB115WH
23” or 28”
8 7/8"
White
4SB118PB
35”
10 15/16"
Polished Brass
4SB118SB
35”
10 15/16"
Satin Brass
4SB118SN
35”
10 15/16"
Satin Nickel
4SB118WH
35”
10 15/16"
White
4SB121PB
42”
11 5/8"
Polished Brass
4SB121SB
42”
11 5/8"
Satin Brass
4SB121SN
42”
11 5/8"
Satin Nickel
4SB121WH
42”
11 5/8"
White
* Add this length (A) to Body length (C) from Body spec sheet(s) to get Total Luminaire Nominal OAL.
Mounting
Mounts directly to 4" outlet box, using crossbar hanger, supplied.
NOTE: Additional Luminaire support plate provided with 35/42” Dia. body to
allow Luminaire to be supported independent of outlet box.
NOTE: Additional Luminaire support plate provided with 35/42” Dia. body to
allow Luminaire to be supported independent of outlet box.
Labels
cULus Suitable for Damp Locations.