Lightolier 7052QD Fascicule

Calculite

®

Incandescent Adjustable Accent

Page 1 of 2

4 1/4” Aperture T4 Clear T. H. Framing Projector

Job Information

Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

a Genlyte Thomas Company

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902

1. Housing: Spun 16 ga. aluminum separates from frame for inspection

through aperture.

2. Lampholder: Die-formed steel yoke with mini-can socket, 18 SF1 leads to

J-box.

3. Mounting Brackets: Adjust vertically from inside of fixture. Durable 16 ga.

steel construction. Use with standard 3/4" or 1 1/2" lathing channels, or 1/2"
(11/16" O.D.) EMT pipe (by others) or Lightolier accessory mounting bars.

4. Face Plate: Die-formed steel 20 ga. with integral cone, matte white baked

enamel.

5. Aperture Cone: Designed to minimize glare and reduce brightness at ceiling

plane.

6. Molded Trim Ring: Provides minimum width white flange in dry or plaster

ceiling.

7. Horizontal Locking Device: Provides locking of horizontal rotation. Optical

assembly rotates up to 358°.

8. Mounting Frame: Die-cast aluminum, suitable for dry or plaster ceilings.
9. Locking Device: Allows removal of optical system for relamping without

disturbing shutter position.

10. Vertical Locking Device: Locks optical assembly which may be adjusted

from 0° to 45°.

11. Focusing Lens: System provides hard or softened edge image projection.
12. Shutters: Four spring shutters with porcelain hand knobs allow for adjust-

ment by cut-off of edge of light beam. Internal clips hold 2" square or round
templates (included).

13. Junction Box: 14 ga. steel, 4" x 3" x 2" box allows inspection from below.
14. Thermal Protector: Meets NEC and UL requirements. Insulation must be

kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.

1950 (set of 2)

1951 (set of 2)

1956 (set of 4, for 1950 & 1951 bars)

7994 (set of 2)

Step Down Transformer  7997 (277V primary 1.1 amp/120V secondary, 

300W capacity)

UL Listed for maximum of 8 No. 12, 75°C through branch circuit supply conduc-
tors, or 60°C supply conductors for end of run.

UL Listed for damp locations, I.B.E.W.

Matte White Finish

T-4 100W
Clear Tungsten Halogen, Mini-Can Base, 120V

7 7/8"

4 1/8: Dia.

Aperture

9 15/16"

Overlap

9 3/16"

Flush

3"

1" min.-
1 7/8" max.
(Ceiling Runner)

3/4" max.
Ceiling 
Thickness