Lightolier 1002P1 Fascicule

Lightolier is a Philips group brand

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • I1008

Lytecaster Recessed Downlighting

Page 1 of 1 

5" Aperture Incandescent Standard Frame-In Kit

 

Open Downlight 

Recessed

   

 

 

Satin 

Baffles 

Basic 

Pinhole 

Adjustable 

Eyeball 

Enclosed 

Wall 

Open 

   

Reflector 

Cone 

Cone 

 

White 

 

 

 

Diffusers 

Washer 

Wet Location

1.  Mounting Frame: .036" (#20 ga.) galvanized steel. Accommodates all ceilings 

up to 1" thick. Four slots are positioned 90° apart to simplify alignment. Push-in/
twist-out rotoclips hold reflector flush to ceiling.

2.  Junction Box:  4" x 3 1/2” x 2”; .063" (#14 ga.) galvanized steel. U.L. listed for 

maximum of 8 No. 12 ga. 75° C through branch circuit conductors (60° C end 
of run).  Integral cable clamps permit attachment of nonmetallic Romex

®

 or 

armored cable without need of additional connectors.

3.  Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to 27" 

with integral nailing tabs. Attaches to wood joist without need of accessories.

4.  Socket Housing: Impact extruded aluminum or galvanized steel.
5.  Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with #18 

ga. SF1 leads to junction box.

6.  Thermal Protector: Meets NEC and UL requirements. Insulation must be kept 

3“ away from fixture sides and wiring compartments and must not be placed 
above fixture in a manner which will entrap heat.

1964 - 20" set of (2)

1956 - set of (4)

1960 - 7/8" depth for wet plaster ceilings.

1967B - up to 2" thick ceilings.

7997 - 277V down to 120V      

 

 

 

 

           300W max. load.

1985N 

1910CKU - Reference conversion kit  

 

specification sheet for trim and lamp options.

UL (Suitable for Damp Locations), I.B.E.W.; 

Romex

®

 is a registered trademark of General Cable Industries Inc.